Solupen
Light Source
Dimensions ~1mm square
Weight - 2gms
Cost - $2-$3
Cold Mirror
Transmission:700nm to 1150nm, reflects back anything <700nm
Dimension: Diameters: 5mm
Squares/Rectangles: 2mm
Thickness: 1.10mm to 3mm
Cost of cold mirror approx $28
Solution Glass
Design-Quartz glass capillary tube
Shape-Capillary cuvette
Outer diameter (OD): 1mm
Inner diameter (ID): 0.126mm
Length: 12.5cm
1.Material used:
IR Quartz Cuvette:
IR quartz cuvettes are suitable for wavelengths from 260nm to 3,500nm http://www.cmscientific.com/cuvettes.php
Features
- Allows 1cc
- Capillaries provide minimized clean-up and contamination at low cost.
Wavelength Sensor
The Thorlabs FDS100 photodiode is ideal for measuring both pulsed and CW fiber light sources, by converting the optical power to an electrical current.
Dimensions
350 - 1100 nm, 3.6 mm x 3.6 mm
weight 0.01 lbs
cost/design $13.50
DIgital output device
- Dimensions: Overall Display: 40.18 x 12.8 mm (1.58 x 0.50")
- Overall Display: 40.18 x 12.8 mm (1.58 x 0.50")
- Digit Height: 10mm (0.39")
- Voltage : voltage of 2.1VDC and a max forward current of 20mA
- Cost : $ 1.95
Batteries
Dimension : 3 x 10 x 16mm
Battery Cost : $6.15 for 1-19 pieces
Charger Cost: $12.00
weight : 0.33g-0.5g
battery life : Battery could run these for 5 months between charges.
Thickness:3mm
Power: 3.7V
Pic of the battery:
Housing Material
Material - Polycarbonates (PC),(tradename - lexan, Makrolon). Polycarbonate is a durable material, easily moldable, workable and can be thermoformed. It has high impact-resistance, can be used over a greater temperature range. Since, Polycarbonate is highly transparent to visible light, a coating is applied to eliminate the transmission of light.
cost - relatively less due to suction force design process
Total cost - approx $200
Design
No comments:
Post a Comment